GCM16 and GCM32 Global Console ManagersProduct Guide

Updated
3 Jun 2017
Form Number
TIPS0772
PDF size
16 pages, 317 KB

Abstract

The Global 2X2X16 Console Manager (GCM16) and Global 4X2X32 Console Manager (GCM32) are the next generation digital keyboard-video-mouse (KVM) console managers that provide KVM-over-IP and serial console management technology in a single appliance. Either console lets you access and manage all servers remotely, even to the system BIOS, using your existing IP infrastructure.

Change History

Changes in the June 3 update:

Introduction

The Global 2X2X16 Console Manager (GCM16) and Global 4X2X32 Console Manager (GCM32) are the next generation digital keyboard-video-mouse (KVM) console managers that provide KVM-over-IP and serial console management technology in a single appliance. Either console lets you access and manage all servers remotely, even to the system BIOS, using your existing IP infrastructure.

The GCM16 has 16 target ports and supports up to 2 local users and 2 remote users, and the GCM32 has 32 target ports and supports up to 2 local users and 4 remote users. Figure 1 shows these two models.

The IBM Global Console Manager GCM16
The IBM Global Console Manager GCM32
Figure 1. The Global Console Managers: GCM16 (top) and GCM32 (bottom)

Did you know?

The GCM16 and GCM32 Global Console Managers provide enhanced remote management, access, and security capabilities with out-of-band access to servers, network equipment, and other devices with serial configuration or console ports all from a single appliance. This unified approach improves staff efficiency by reducing the time required to remotely diagnose, reconfigure, repair, or restore servers as well as network devices and other hardware with serial configuration or management consoles, or both.

The serial capabilities of these appliances enable connecting and managing nearly any device with a serial port directly from the console manager, including switches, routers, and PDUs. SSH and Telnet connections are supported.

Part number information

Ordering information is shown in Table 1. Note that when ordering with feature codes, use machine type-model 1754HC1 for the GCM16 and 1754HC2 for the GCM32.

Table 1. Ordering part numbers and feature codes

Description Part number GCM16 feature code GCM32 feature code
Global Console Manager GCM16 1754D1X 1754HC1 fc 6694 Not applicable
Global Console Manager GCM32 1754D2X Not applicable 1754HC2 fc 6695
USB Conversion Option (UCO) (single) 43V6147 1754HC1 fc 3757 1754HC2 fc 3757
USB Conversion Option (UCO) 4-pack 39M2895 1754HC1 fc 3756 1754HC2 fc 3756
Long KVM Conversion Option (KCO) 4-pack 39M2897 1754HC1 fc 3754 1754HC2 fc 3754
Virtual Media Conversion Option Gen2 (VCO2) 46M5383 1754HC1 fc 5341 1754HC2 fc 5341
Serial Conversion Option (SCO) 46M5382 1754HC1 fc 5340 1754HC2 fc 5340

The GCM16 Global Console Manager includes the following items:

  • 16-port console switch
  • Mounting hardware for EIA space for rack sidewall compartment
  • One 1U filler panel
  • Two C13/C14 rack power cables
  • RJ45-DB9F DCE adapter for use with Setup port
  • RJ45-DB9M DTE adapter for use with Modem port
  • 16 terminators for daisy-chaining configurations
  • Installation publications and warranty

The GCM32 Global Console Manager includes the following items:

  • 32-port console switch
  • Mounting hardware for EIA space for rack sidewall compartment
  • One 1U filler panel
  • Two C13/C14 rack power cables
  • RJ45-DB9F DCE adapter for use with Setup port
  • RJ45-DB9M DTE adapter for use with Modem port
  • 32 terminators for daisy-chaining configurations
  • Installation publications and warranty

Each of the Conversion Option parts listed in Table 1 ships with:

  • One Conversion Option (4-packs have four)
  • One CAT-5 cable (four-packs have four)
  • Installation publications and warranty

The GCM digital console switches enable you to share one workspace (keyboard, mouse, and display) across many target systems. The target systems are connected to the console switch via CAT-5 cables and the appropriate conversion option at the target end. Conversion options are available with either USB or PS/2 connectors. Connections to serial devices are also supported with serial conversion options.

With server densities continually increasing, cable bulk remains a major concern for network administrators. The GCM16 and GCM32 switches significantly reduce KVM cable volume in the rack by utilizing the innovative conversion option cables and single, industry-standard CAT-5 UTP cabling. This allows a higher server density while providing greater airflow and cooling capacity. In addition, multiple target systems can be daisy-chained together using CAT-5 cables, and then all connected to the console switch using one cable, thereby eliminating a lot of cable clutter.

Feature comparison

The GCM16 and GCM32 replace the GCM2 Global Console Manager. Table 2 compares the console switches.

Table 2. Comparison of features
Feature GCM16 GCM32
Model 1754D1X 1754D2X
Number of local concurrent users 2 2
Number of remote concurrent users 2 4
Local user connections - KVM VGA + 2x USB VGA + 2x USB
Local user connections - total USB 4 (including 2 for K & M) 4 (including 2 for K & M)
Maximum number of target systems - Direct (ARI ports) 16 32
Maximum number of target systems - Daisy-chained 256 512
Maximum number of target systems - Tiered configuration 1024 (2 levels) 1024 (2 levels)
Maximum video resolution 1600 x 1200 standard
1680 x 1050 widescreen
1600 x 1200 standard
1680 x 1050 widescreen
User interface Web GUI (local and remote) Web GUI (local and remote)
Manage remotely with Virtual Console Software (VCS) Yes Yes
Manage remotely with Avocent DSView Yes* Yes*
Keep Alive feature in Conversion Options Yes Yes
IPV6 support Yes Yes
User Authentication via user database in console switch Yes Yes
User Authentication via remote LDAP server Yes Yes
AES encryption Yes Yes
Manage serial devices Yes Yes
Manage intelligent power devices Yes Yes
Smart Card or Common Access Card support Yes Yes
Support for USB Conversion Option, UCO (43V6147 and 39M2895) Yes Yes
Support for KVM (PS/2) Conversion Option, KCO (39M2897) Yes Yes
Support for Virtual Media Conversion Option Gen2, VCO2 (46M5383) Yes Yes
Support for Serial Conversion Option, (SCO) 46M5382 Yes Yes
Virtual media Yes Yes
Gigabit Ethernet (10/100/1000 Mbps) Yes (2)† Yes (2)†
Serial port Yes Yes
Modem port for out-of-band access Yes Yes
Firmware upgrades to the console switch Yes Yes
Firmware upgrades to the COs Yes Yes
Input power 100-240V, 50/60 Hz
18 W power
100-240V, 50/60 Hz
24 W power
Redundant power supplies Yes Yes

* Avocent DSView management software available directly from Avocent
† Ethernet ports are redundant for increased availability

Connections

Figure 2 shows the connections on the GCM32 Global Console Manager. The GCM16 Global Console Manager has identical connections except it only has 16 ARI ports, whereas the GCM32 has 32 ARI ports.

Connections on the GCM32 Global Console Manager
Figure 2. Connections on the GCM32 Global Console Manager

Note: Figure 2 shows the rear of the unit. There are no connectors on the front of the unit.

Features

Details about the features of the GCM16 and GCM32 are as follows:

Number of local concurrent users:

The GCM16 and GCM32 console switches enable one or two local user to access any attached servers. If the target device is currently in use, the user attempting to gain access will be given an opportunity to force a connection to the device if their preemption level is equal to or higher than the current user’s level. If the user attempting to gain access has a lower preemption level, the active user will be asked if they wish to give up control to the new user (a timeout is also configurable).

The GCM16 and GCM32 both support two independent local users as shown in Figure 3. One local user attaches to the VGA and USB ports on the console switch as shown in Figure 2. The second local user attaches to a tiered (slave) console switch (see "Tiered consoles" below for more information). These two ports are independent of one another (that is, not pre-emptive or shared). This configuration allows you to place a console in every rack, for local connectivity to those servers complete with local KVM access, plus tier up to a master console that has local KVM access to all the servers attached to all attached console switches.

6.4CE.jpg
Figure 3. Two local users in a tiered configuration

Local user connections:

Local displays are connected to the console switch using VGA analog connections. Keyboard and mouse must be USB attached and two USB ports are provided for this purpose. Two additional USB ports are provided for the attachment of devices such as optical drives or memory keys. These devices can be made available on remote target systems provided Virtual Media Conversion Options are used to connect to those target systems. Note, however, that the Virtual Media Conversion Option does not support chaining of target systems.

Target systems:

The GCM16 has 16 target system ports (known as analog rack interface or ARI ports) and the GCM32 has 32 target system ports. These can be directly attached to systems with the appropriate USB or PS/2 conversion option connector on the end. These connections use standard CAT-5 cables. You can increase the number of connected target systems by two methods: chaining or a tiered arrangement of switches (more about these below). Both methods mean that each of the 16 or 32 ports will have multiple systems connected to it. You can mix connection methods.

Remote access via Ethernet or Modem:

Remote access to console switch and to the target systems is via a Web browser. The switch provides agentless remote control and access. No special software or drivers are required on the attached servers or client. Access is normally via a standard Ethernet network, requiring that the console switch be connected to the network via one or both Ethernet ports. Connecting both ports provides redundancy. Additionally, if a modem is connected to the modem port on the console switch and the modem is connected to a telephone (PSTN) system, then you can dial the console switch via your modem and establish an out-of-band connection to the console switch using the Point-to-Point Protocol (PPP) for remote control. V.34, V.90, or V.92 connections are supported.

Conversion Options:

These are cable-connector combinations that are connected between the CAT-5 cables from the console switches to the target systems. Figure 4 shows the five conversion option cables available for use with the console switches. The part numbers are listed in Table 1.

The KVM Conversion Option (KCO) is suitable for target servers with VGA and PS/2-style mouse and keyboard connections. The USB Conversion Option (UCO) is for systems with VGA and USB connections. The Virtual Media Conversion Options (VCO and VCO2) supports the virtual media capability of the console switches; however, they do not support chaining. We describe both virtual media and chaining later in this document.

7.47B8.jpg
Figure 4. Available conversion options

The built-in memory of each connection option helps simplify configuration by assigning and retaining unique server identification codes for each attached server. This integrated intelligence enhances security and helps prevent unauthorized access to a server through cable manipulation. The connection option is powered directly from the server, providing Keep Alive functionality even if the server is not powered on.

Supported video resolutions are listed in the following table.

Table 3. Supported video resolutions
VCO2 Standard (4x3) VCO Widescreen KCO & UCO
640 x 480 @ 60 Hz
800 x 600 @ 75 Hz
960 x 700 @ 75 Hz
1024 x 768 @ 75 Hz
1280 x 1024 @ 75 Hz
1600 x 1200 @ 60 Hz
800 x 500 @ 60 Hz
1024 x 640 @ 60 Hz
1280 x 800 @ 60 Hz
1440 x 900 @ 60 Hz
1680 x 1050 @ 60 Hz
1920 x 1080 @ 60 Hz
640 x 480 @ 60 Hz
800 x 600 @ 75Hz
1024 x 768 @ 75 Hz
1280 x 1024 @ 75 Hz

 

Local and remote user interfaces:

The OSCAR interface of older console switches has been replaced by a Web browser interface, which is accessible both locally and remotely. You can use the local management interface by connecting directly to the local port to manage the GCM16 and GCM32 switches. You can also use the remote browser interface to manage your switch. The browser interface is launched directly from the switch, and any devices connected to the GCM16 and GCM32 switches are automatically detected. The local and remote user interfaces share a similar look and feel.

Virtual Media:

The GCM16 and GCM32 support virtual media when the target systems are connected using the Virtual Media Conversion Option Gen2 (VCO2), part number 46M5383. You can use virtual media support to connect USB 2.0 media devices to the console switch using one of the four USB ports and make those devices available to any connected system. With this feature, you can install software; install, upgrade, or recover the operating system; update the BIOS code; or boot the target system from a USB drive.

Control of how the USB device is connected to the target system is managed through the user interface. The browser interface presents the following configuration options:

  • Virtual Media Locked: The locking option specifies whether a virtual media session is locked to the KVM session on the target device. When locking is enabled (default) and the KVM session is closed, the virtual media session will also be closed. When locking is disabled and the KVM session is closed, the virtual media session will remain active.
  • Allow Reserved Sessions: Ensures that a virtual media connection can only be accessed with your username and that no other user can create a KVM connection to that target device. When the associated KVM session is disconnected, the virtual media session may be disconnected according to the Locked setting.
  • Write Access: With this option, you can specify whether the target system can write to the USB device (assuming it is writable).
  • Encryption: You can configure encryption levels for virtual media sessions. The choices are: None (default), 128-bit SSL (ARCFOUR), DES, 3DES, and AES.

Note that USB ports are assigned to a single virtual media session and cannot be independently mapped. This means you cannot map one USB device to one target system and another USB device to another target system.

Use of LDAP and smart cards to authenticate access:

The GCM16 and GCM32 support Lightweight Directory Access Protocol (LDAP) for integration with existing authentication/security models. This ensures that you maintain only one set of user credentials and can maintain strict password rules.

The GCM16 and GCM32 switches also allow you to use smart cards to ensure access is authorized. Smart cards are pocket-sized cards that store and process information. Smart cards such as the Common Access Card (CAC) can be used to store identification and authentication to enable access to computers, networks, and secure rooms or buildings. Smart card readers are connected directly to the switch via one of the USB ports, or they can be connected to any remote workstation that is running the remote browser interface or DSView management software and is connected to the switch using an Ethernet connection.

Note: For smart card use, the target device must be connected to the console switch using the Virtual Media Conversion Option Gen2 (VCO2), part number 46M5383.

Use of encryption:

The GCM16 and GCM32 support encryption for KVM signals and for remote media. Available encryption levels are 128-bit SSL, DES, 3DES, or AES. These are configurable via the browser interface.

True serial capabilities:

The GCM16 and GCM32 switches support Serial Conversion Option (SCO) cables that provide serial capabilities through Telnet. The capability provides a proper serial connection, not serial-to-VGA conversion. You can launch an SSH session or a serial client from the on-board Web interface to connect the targets that are connected to the GCM16 and GCM32 switches with an SCO cable. The SCO includes a separate USB-to-barrel power cord adapter - see Figure 2. Connect the USB end of the adapter to an available USB port on the target system to supply power to the SCO.

Managing Intelligent Power Distribution Units

The dedicated Power Distribution Unit (PDU) ports on the GCM16 and GCM32 switches support the direct attachment of certain Avocent-branded Intelligent PDUs and can provide the ability to view and manage these units directly through the switch. Lenovo Intelligent PDUs are not supported.

Chaining

Cable chaining enables users to manage a "daisy chain" of multiple servers through a single connection to the console switch, replacing many long cables with just a few short ones, simplifying rack management, helping lower cabling cost and reducing setup, diagnostic, and maintenance times. The daisy-chain connectivity has the added advantage of thin, flexible, industry-standard CAT5 cabling and standard RJ-45 connectors, eliminating the need for one-to-one, dedicated cable connections between KVM switch ports and managed devices. This cable chaining solution allows up to 16 target systems to be chained together and connected to one port on the switch.

Figure 5 shows an example of chaining three target systems from one port on the console switch. Each conversion option part number includes a CAT-5 cable to connect it to either the console switch or its neighbor conversion option. The console switch includes the terminator needed at the end of the daisy chain.

11.49DC.jpg
Figure 5. Chaining using USB Conversion Options

Note: The Virtual Media Conversion Options (VCO and VCO2) do not support chaining.

Tiered consoles

You can tier multiple rack console switches to enable access to additional servers. In a tiered system, an ARI port on the main rack console switch connects to the ACI port of a tiered rack console switch (see Figure 3 for locations of these ports). Consider a tiered configuration if you want to manage servers connected to multiple switches from one central location. For example, you could have a primary GCM16 console switch with 16 switches tiered underneath it that all have servers chained on their ports.

The GCM16 and GCM32 support two levels of tiering. The use of virtual media and smart card authentication are both supported only when primary and secondary switches are GCM16 or GCM32 console switches.

Figure 6 shows an example of tiered consoles.

Tiered consoles
Figure 6. Tiered consoles

If there are local users attached to other tiered consoles, each can control target systems connected to that specific console. The local user at the primary console (Local user A in Figure 6) can preempt other local users if necessary.

The GCM16 and GCM32 support up to 1024 target systems in a tiered configuration.

Physical specifications

The GCM16 has the following specifications:

Height: 4.37 cm (1.72 inches) - 1 rack unit (1R)
Width: 43.18 cm (17 inches)
Depth: 32.4 cm (9.2 inches)
Weight: 3.2 kg (7.0 lb)

The GCM32 has the following specifications:

Height: 4.37 cm (1.72 inches) - 1 rack unit (1R)
Width: 43.18 cm (17 inches)
Depth: 32.4 cm (9.2 inches)
Weight: 3.5 kg (7.6 lb)

Operating environment

The adapter is supported in this environment:

  • Temperature:
    • Operating: 0° to 50°C (32° to 132°F)
    • Non-operating: -20° to 70°C (-4° to 158°F)
  • Relative humidity:
    • Operating: 20% to 80% (relative, non-condensing)
    • Non-operating: 5% to 95% (relative, 38.7 °C maximum wet bulb temperature)

Warranty

The GCM16 and GCM32 have a three-year limited warranty.

Avocent DSView management software

Avocent DSView management software, available directly from Avocent, provides data centers with a secure, centralized management solution for all IT assets. This software allows administrators to access, diagnose, and modify any managed device from any point on the globe, regardless of the health or status of the OS or the network connection to those devices. This software effortlessly extends the GCM16 and GCM32 KVM and serial management capabilities to include support for blades, embedded service processors, virtual servers, and other 3rd party devices in heterogeneous data center or remote office environments, making them more manageable, accessible, extensible, and secure.

This comprehensive control and manageability solution delivers secure, automated, real-time tracking and control of all your physical and virtual servers and embedded technologies, providing increased agility and security with a tangible return on investment.

Avocent DSView software features:

  • Single, secure, browser-based interface to manage your entire datacenter or remote office
  • Manages both physical and virtual assets
  • Hub and spoke architecture for redundancy and real-time synchronization
  • 60 day free software support

The DSView software is available directly from Avocent.

Server support

The console switches are supported connected to the servers listed in the following tables.

Support for System x and dense servers with Xeon E5/E7 v4 and E3 v5 processors

Table 4. Support for System x and dense servers with Xeon E5/E7 v4 and E3 v5 processors
Part
number
Description
x3250 M6 (3943)
x3250 M6 (3633)
x3550 M5 (8869)
x3650 M5 (8871)
x3850 X6/x3950 X6 (6241, E7 v4)
nx360 M5 (5465, E5-2600 v4)
sd350 (5493)
1754D1X Global 2x2x16 Console Manager (GCM16) Y Y Y Y Y Y N
1754D2X Global 4x2x32 Console Manager (GCM32) Y Y Y Y Y Y N

Support for servers with Intel Xeon v3 processors

Table 5. Support for servers with Intel Xeon v3 processors
Part
number
Description
x3100 M5 (5457)
x3250 M5 (5458)
x3500 M5 (5464)
x3550 M5 (5463)
x3650 M5 (5462)
x3850 X6/x3950 X6 (6241, E7 v3)
nx360 M5 (5465)
1754D1X Global 2x2x16 Console Manager (GCM16) Y Y Y Y Y Y Y
1754D2X Global 4x2x32 Console Manager (GCM32) Y Y Y Y Y Y Y

Support for servers with Intel Xeon v2 processors

Table 6. Support for servers with Intel Xeon v2 processors
Part
number
Description
x3500 M4 (7383, E5-2600 v2)
x3530 M4 (7160, E5-2400 v2)
x3550 M4 (7914, E5-2600 v2)
x3630 M4 (7158, E5-2400 v2)
x3650 M4 (7915, E5-2600 v2)
x3650 M4 BD (5466)
x3650 M4 HD (5460)
x3750 M4 (8752)
x3750 M4 (8753)
x3850 X6/x3950 X6 (3837)
x3850 X6/x3950 X6 (6241, E7 v2)
dx360 M4 (E5-2600 v2)
nx360 M4 (5455)
1754D1X Global 2x2x16 Console Manager (GCM16) Y Y Y N Y N Y Y Y Y Y N N
1754D2X Global 4x2x32 Console Manager (GCM32) Y Y Y N Y N Y Y Y Y Y N N

Support for servers with Intel Xeon v1 processors

Table 7. Support for servers with Intel Xeon v1 processors
Part
number
Description
x3100 M4 (2582)
x3250 M4 (2583)
x3300 M4 (7382)
x3500 M4 (7383, E5-2600)
x3530 M4 (7160, E5-2400)
x3550 M4 (7914, E5-2600)
x3630 M4 (7158, E5-2400)
x3650 M4 (7915, E5-2600)
x3690 X5 (7147)
x3750 M4 (8722)
x3850 X5 (7143)
dx360 M4 (7912, E5-2600)
1754D1X Global 2x2x16 Console Manager (GCM16) Y Y Y Y Y Y Y Y Y Y Y N
1754D2X Global 4x2x32 Console Manager (GCM32) Y Y Y Y Y Y Y Y Y Y Y N

See the ServerProven Web site for the latest compatibility information:
http://www.lenovo.com/us/en/serverproven/

Supported racks

The GCM16 and GCM32 Console Managers can be mounted in one of the following rack cabinets:

  • 42U S2 Rack
  • 42U Enterprise Rack
  • 25U S2 Rack
  • 11U Office Enablement kit
  • S2 42U Dynamic Standard Rack
  • S2 25U Standard Rack
  • 1200 mm Deep Static Rack
  • 1200 mm Dynamic Rack
  • 42U Enterprise V2 Rack

Related product families

Product families related to this document are the following: